How to find your Ring size at home ( No Ring Sizer Needed)

When you buy a ring online, one big question is: will it fit? No need to go to the jeweler or a ring sizer to find out. Use a few things you have already at home to measure your finger and order with confidence!

This guide will show you the easiest ways to measure your ring size, convert to a real size, and avoid the mistakes that lead to a ring that's too tight or too loose. 

How to Find Your Ring Size at Home Without a Ring Sizer?

All of the methods below come down to one number: the circumference of your finger, or the inner diameter of a ring that fits you. With that number, the size chart will tell you your size.

Three easy ways to measure at home:

1. String or floss – the fast track
2. Paper and a ruler – accurate too, easier to mark
3. An existing ring – quickest if you already have a fitting one 

What You Need - To Measure Your Ring Size

Before starting to measure your ring size, you generally need a few things that will help in finding out your perfect ring size. 

1. A piece of thread or string 
2. Or a thin strip of paper 
3. A fine marker or a pen 
4. Scissors 
5. An old ring that fits you well

If you don’t have a measuring tape, then that’s also not a problem; a ruler will do the same job. However, in case you don’t have a standard ruler as well, then any printed ruler from a reliable source, or the edge of a credit card, which is 85.6 mm long to measure the length.

How to Measure Ring Size With String?

1. Take the string and wrap it around the base of your finger.

2. Mark the point where it coincides.

3. Lay it flat along a ruler.

4. Measure to your mark, in mm from the end

5. Find your size on the size chart below:

No stretch thread or dental floss, not yarn or elastic. They will expand and lose your measurement. 

How to Measure Ring Size With Paper and a Ruler?

1. How to Measure a Ring Size Using Paper and a Ruler
2. Cut a strip of paper about 6 inches long and ½ inch wide.
3. Wrap it around the bottom of your finger.
4. Mark where the end hits the rest of the strip.
5. Measure that length with a ruler in millimeters.

This is the circumference of your finger, just like the string method.

How to Find Your Ring Size Using an Existing Ring?

1. Put the ring flat on a ruler.
2. Measure across the inside from one inner edge to the other.
3. Match that number with the diameter column of the chart below. 

Quick Note: Remember to take the ring whose measurement is ideal for the finger in which you’re planning to wear the new one. 

How to Convert Your Finger Measurement Into a Ring Size

Now that you’ve measured your finger, it’s time to turn it into a ring size. With the help of your finger circumference (or ring diameter), use this chart to find your size.

How to Make Sure Your Ring Size Measurement Is Accurate?

There are a few habits that really make a difference to how reliable your final number is.

Take the measurement two or three times: Preferably later in the day when your fingers are at their normal size (not right after you've gotten out of bed or exercised, and not when your hands are very hot or very cold).

Measure the finger and hand you will be wearing the ring on properly: Some fingers are longer than others, and the same goes for your left and right hand.

Check your knuckle, not just the bottom of your finger: Slip the loop of string or paper over it. The ring should go over the knuckle and still be comfortable at the base.

Select a non-stretch fabric: Yarn, elastic, or a tape measure that is stretched will give you an inaccurate reading.

Don't pull it too tight or let it be too loose: The string or paper should not be squeezed, but sit snug.

If you fall between two sizes, particularly if you want a wider band or a customized one, it’s worth checking in with the brand before you decide. Often they can tell you which way to round just based on the specific design. 

How Should a Ring Fit Your Finger?

A ring of the correct size should feel securely snug on your finger instead of having the fear that it could fall off or the pain of it feeling too forced. 

Signs that it’s a good fit:

• Slides over the knuckle with a little resistance, but feels comfortable at the base.
• Tight at the bottom, no deep grooves
• Does not spin; turns with a little effort.

Signs it’s too tight: Your finger looks pinched or puffy around the band, or it leaves a deep, lasting dent.

Signs it’s too loose: If it spins around easily or comes off when you tip your hand or wash it, you know it's too loose. 

How to Use Your Measurement When Shopping Online

At last, when you’ve measured the circumference of your finger and also converted it into a ring size that fits you. Save your ring size on your phone like it’s a password so that you don’t need to repeat the same process whenever you want to buy a ring online. 

Whenever you buy any ring from The Jaipur Tradition, you’ll see this option to select a ring size (Indian size) with a huge variety of sizes to choose from for almost everyone.

FAQs (Frequently Asked Questions) 

What's the best way to measure your ring size at home?

For most people, the string method is the easiest. All you need is a piece of unwaxed dental floss or non-stretch thread and a ruler. Wrap it around the base of your finger, note where it overlaps, and measure the length in mm. The whole process takes about two minutes, and you can compare the result with the size chart above.

How precise is a string for measuring ring size?

String is pretty accurate if you use something with no stretch, like dental floss, and measure carefully. Most people will be within half a size of their real ring size. For more accurate results, measure at different times of the day, make sure the loop slides over the knuckle, and don’t pull the string too tight or leave it too loose.

What if I'm confused between ring sizes?

Go for the bigger one. A ring that is a little loose is easy to fix with sizing beads or a ring guard and is more comfortable to wear. A ring that is too tight can be painful and hard to remove, especially in hot weather. 

Can my ring size change?

It does. Yes. Weight gain or loss, pregnancy, aging, temperature, and even the seasons can all influence the size of your fingers. If you haven't measured in more than a year, it's wise to measure your size again before buying a new ring.

How do I convert finger measurement to Indian ring size?

Measure the circumference of your finger in mm and see the Indian Size column in the conversion table above. Charts vary slightly from jeweller to jeweller and brand to brand, so check the store’s size guide before ordering. 

Conclusion 

Getting your ring size at home is easier than you think. If you don’t have a ring sizer or don’t want to go to the jeweler, then simply use some string or a piece of paper and a ruler to measure your finger, then refer to the conversion chart above. Measure more than once. Remember your knuckle and band width, and if you are between sizes, go with the larger size.

Once you actually are sure of your ring size, your ring shopping becomes way easier. Whether you’re looking for a plain silver ring, a gemstone ring, or a statement design, taking a few minutes out and finding out your ring size can avoid the whole hassle of guesswork or going to an actual store.

Time to look for your ring? Explore The Jaipur Tradition and wear the most exquisite ring collection in the size that fits you best.